Video: AFL FASTConnect® LC Connector for 900µm Fiber Cable

by: FOCTV

Published: July 31, 2025

, Last updated: July 31, 2025

Send Fiber Optic Center an email to ask a question

Termination Instructions for LC Fiber Optic Connectors and 900 micron Cable

View all our FASTConnect LC Connectors products here.

Transcript:

This video demonstrates step-by-step termination instructions for the AFL FAST LC connector on 900 micron fiber cable. The FAST LC connector kit contains the following items: a 900 micron boot, clear protective tubing, 250 micron tubing, and a FAST LC connector. A separate boot kit is available for 2mm and 3mm terminations.

Always wear safety glasses and properly dispose of fiber shards when handling and cleaving optical fibers. For 900 micron terminations that utilize the 900 micron fan-out breakout kit, begin by placing the 900 micron cable clamp onto the cable about 10 in from the end of the cable. Place the 900 micron boot onto the cable, strip 35 mm of 900 micron and 250 micron coating off. Clean the fiber with a lint-free wipe and fiber preparation fluid.

Place the fiber into the CT30 cleaver at the 10.5 mm cleave length. Close the clamp, push the cutting lever downward to cleave the fiber.

Next, take the FAST LC connector and squeeze the top and bottom of the wedge to ensure that it is engaged. Insert the fiber into the connector, create a slight bend to maintain contact. Release the wedge clip by squeezing both sides and remove the wedge clip. Now push the boot onto the connector body and the termination is complete.

About the Author

FOCTV Not all video is created equal. FOCTV provides the most innovative, high quality solutions with the best technical information within the photonics and nanotechnology world. FOCTV was developed to provide solutions for customers’ challenges and information on the highest quality fiber-optic equipment, supplies and entire fiber-optic cable assembly process.

About Fiber Optic Center, Inc.

Fiber Optic Center, Inc., (FOC), is an international leader in distributing fiber optic components, equipment and supplies and has been helping customers make the best cable assemblies in the world for over two decades. Several areas of specialization and expertise, in which they are the industry leader, make them the preferred choice for many of the world’s fiber professionals. In these key technology areas, FOC is "at least as technical as the manufacturer" about the products they sell. Striving to "make the business part easy," they offer outstanding and personal customer service, low or no minimum purchase order values, and from-stock delivery on industry-leading products and technology. FOC is the industry connection to the most innovative optical products, technologies and technical experts who integrate their manufacturing knowledge and vast experience into customers' worldwide operations. @FiberOpticCntr

For further information contact:

Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA 02740-6322
Toll Free in US: 800-IS-FIBER or 800-473-4237 . Direct 508-992-6464. Email: sales@focenter.com or fiberopticcenter@focenter.com

For media contact:

Kathleen Skelton, Director of Strategic Marketing, C: 617-803-3014 . E: kskelton@focenter.com

Copyright Notice: Copyrights in all articles published on focenter.com are owned by Fiber Optic Center, Inc. (FOC) or other individuals or entities. No content on focenter.com may be reproduced, stored in a retrieval system, or transmitted in any form of by any means, electronic, mechanical, photocopying, recording, or otherwise, in whole or in part, without the prior written permission of Fiber Optic Center, Inc.