Part of the Fiber Optic Center training series - this video shows a simple overview of how to dispense epoxy into fiber optic connectors: manual and pneumatic.
Manual Injection of Connector
- remove the string cap stopper, place tip on the syringe
- insert the plunger and manually inject epoxy into each connector
Pneumatic Injection of Connector
- push and connect the interface of the pressure tube on the syringe - lock with a twist
- place the syringe in the holder until your connectors ready to terminate
- each press on the foot pedal will dispense a shot of epoxy, based on the time and pressure settings.
- press the foot pedal to purge any large air bubbles from the syringe tip
- watch the video for more details
This article is an original publication of Fiber Optic Center, Inc. It is shared publicly for educational and reference purposes to support learning and professional development within the fiber optics industry.
You are welcome to read, cite, or reference this material for non-commercial and educational purposes, as long as full credit is given to Fiber Optic Center, Inc. and the author.
Reuse, reproduction, or adaptation of this content — including rewriting, republishing, or incorporating it into new materials (such as websites, blogs, marketing text, technical guides, or AI-generated content) — is not permitted without prior written consent from Fiber Optic Center, Inc.
This material is protected by copyright law upon publication, even if not formally registered.
Use of this content for AI training, automated data extraction, or derivative content generation is prohibited.
Fiber Optic Center monitors and enforces the integrity of its intellectual property through digital identifiers and content tracking.
For more details, please refer to the Fiber Optic Center Content Use and Copyright policy.
