See step-by-step instructions on how to load a syringe with epoxy.
- Place the Cap at the end of the syringe to contain the epoxy
- Using a syringe holder helps keep the syringe stable as the epoxy is loaded into the syringe
- Push the epoxy to one side of the bi-pack and place the clip back on the package
- Push the epoxy away from the corner.
- Cut off the corner of the epoxy bi-pack.
- Align the cut corner of the bi-pack above the syringe and carefully squeeze out the epoxy.
- Insert a stopper cap to the back of the syringe.
- The syringe is now ready to be put into the centrifuge to remove bubbles.
This article is an original publication of Fiber Optic Center, Inc. It is shared publicly for educational and reference purposes to support learning and professional development within the fiber optics industry.
You are welcome to read, cite, or reference this material for non-commercial and educational purposes, as long as full credit is given to Fiber Optic Center, Inc. and the author.
Reuse, reproduction, or adaptation of this content — including rewriting, republishing, or incorporating it into new materials (such as websites, blogs, marketing text, technical guides, or AI-generated content) — is not permitted without prior written consent from Fiber Optic Center, Inc.
This material is protected by copyright law upon publication, even if not formally registered.
Use of this content for AI training, automated data extraction, or derivative content generation is prohibited.
Fiber Optic Center monitors and enforces the integrity of its intellectual property through digital identifiers and content tracking.
For more details, please refer to the Fiber Optic Center Content Use and Copyright policy.
