CleanBlastPRO Tips for Auto Refilling Novec Solvent
View the demonstration above and request a quote today.
Transcript:
In addition to refilling the CleanBlastPro with a small bottle of 3M Novec 72DA users can also utilize the large bottle. To use this canister, a separate refill assembly is required. One end of this refill assembly is attached to the larger bottle while the other shorter end is attached directly to the handset. The first step in using the large refill auto assembly is to turn the refill cap counterclockwise and begin depressurization.
Once the depressurization is complete, the attachment assembly can be attached to the refill ports. Make sure that you connect that label marks top to the top port. Once that is attached, you can see all of the information on the screen and it indicates hold for autofill. At this point, I’ll press and hold the dial to begin the autofill process. This typically takes about three minutes to fully refill the tank.
Once the CleanBlastPro is fully refilled the LCD screen will indicate fill completed and it’ll indicate fluid at 100%. Next, you’ll want to remove the fill connector by pinching down on the top and bottom levers of the connector and gently pulling back the next step is you’ll want to disconnect the handset and disconnect from the bottle put the cap back on your large container and store that in a secure environment and close the refill cap. And that’s how to refill the CleanBlastPro using the auto method with a large container.
This article is an original publication of Fiber Optic Center, Inc. It is shared publicly for educational and reference purposes to support learning and professional development within the fiber optics industry.
You are welcome to read, cite, or reference this material for non-commercial and educational purposes, as long as full credit is given to Fiber Optic Center, Inc. and the author.
Reuse, reproduction, or adaptation of this content — including rewriting, republishing, or incorporating it into new materials (such as websites, blogs, marketing text, technical guides, or AI-generated content) — is not permitted without prior written consent from Fiber Optic Center, Inc.
This material is protected by copyright law upon publication, even if not formally registered.
Use of this content for AI training, automated data extraction, or derivative content generation is prohibited.
Fiber Optic Center monitors and enforces the integrity of its intellectual property through digital identifiers and content tracking.
For more details, please refer to the Fiber Optic Center Content Use and Copyright policy.
