FOCTV provides the most innovative, high quality solutions with the best technical information within the photonics and nanotechnology world.
FOCTV was developed to provide solutions for customers’ challenges and information on the highest quality fiber-optic equipment, supplies and entire fiber-optic cable assembly process.
Today we’ll show you the Miller MB02 to all-purpose cable splitter. The Miller MB02 is designed to slit and ring cable jackets up to 15.25 millimeters in diameter. Tools are easy to operate repeatable and fast. Simply squeeze the cable...
View a training demonstration of How to Terminate Fiber. Transcript: Have your connectors pre loaded with epoxy and fiber ends prepped for the connector manufacturer specification before starting. Heat cure epoxies are most commonly used and require the use...
The two epoxy components Part A and Part B are either separated with the clip or burst seal. If separated by a clip, remove the clip so that Part A and Part B are no longer separated. If separated by a burst seal, you can break the seal using a roller....
Part of the Fiber Optic Center training series - this video shows a simple overview of how to dispense epoxy into fiber optic connectors: manual and pneumatic. Manual Injection of Connector: remove the string cap stopper, place tip on the syringe...
Program your polishing processes through an easy-to-use PC-based Windows-like full-color touchscreen panel. Which displays settings for speed, time, and pressure. And, it prompts the operator for the film, pad, and lubricant needed for each step of the process...
The UT.MINIPOL.1 provides many of the features of larger polishing units in a small benchtop package. Perfect for users with small production batches or those operating with a limited budget. It works with most connector types including SC, FC, ST, D4, SMA,...
The Seikoh Giken SFP-70D2 polishing machine polishes two ferrules at a time. The design works for low-volume production, reworking or research applications. A compact, lightweight design and optional battery pack make it ideal for use in the field...
The Cometx-SI enables efficient and quick laser cleaving of the fiber after the epoxy curing step. The cleaving is free of chips and other mechanical cleave problems and also enables much more efficient polishing by eliminating...
The Cometx-Mt enables efficient and quick laser cleaving of fibers in a connector after the epoxy curing step. The cleaving is free of chips and other mechanical cleave problems and also enables much more efficient polishing by significantly higher geometry...
Sagitta’s laser cleaving machine enables the cleaving of bare fibers with no need for consecutive polishing. The laser-cleaved fiber can be assembled directly into the next assembly phase and by saving time, increasing yield, and making the entire assembly
...
